|
Montana | We has the rotary head stop working today and when we called the service department, they said there can be problems with the big connectors that are flat face quick connect. Sure enough one had backed off slowly and lost flow. So if you have hydraulic flow problems with a MacDon, You may just need to tighten the Quick connectors. We did ours by turning the connector clockwise till tight. I hope this helps someone. The service department at hover in Great Falls, Montana, are sure nice people and good to talk you through problems.
(C169F49E-A721-46EC-B448-0987538A5CFC (full).jpeg)
Attachments ---------------- C169F49E-A721-46EC-B448-0987538A5CFC (full).jpeg (212KB - 30 downloads)
| |
|