Is there a setting on the 2630 where you can adjust the 3pt hitch start/stop recording height? I have an 2013 8r series tractor with a 60 ft Van 3pt sprayer. Sprayer runs off a hydraulic pump and I don't have any of that hooked up to a rate controller. I run at a constant speed and toggle the 3 section booms off with the sprayer controller box. The 2630 records when I have the 3pt lift pretty much all the way down, but I want it to record when the 3pt lift is only down about 6" so I can spray over the top of some taller cotton. For whatever reason, it will not. I have recording set to the 3pt lift and I just want it to paint the screen. Any ides other than manual recording?