AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Challenger MT 865C Trimble CFX-750 heading spinning
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
vasile123
Posted 7/5/2018 06:03 (#6851367)
Subject: Challenger MT 865C Trimble CFX-750 heading spinning


We have a MT865C with Trimble guidance system instaled on it with CFX-750 with NAV Controller III.
Earlier was instaled an TopCon guidannce system....
The system works fine no errors occured.
Only one problem when turning the vehicle in backward speed the tractori icon on monitor is turning arround like it should be but when turning again in forward speed the icon on screed
may go backward or may start spinning or may go sideway.
Changed all Trimble Hardware monitor changed to FMX.
NavController Changed.All cables Changed.
We have made an upgrade of armrest console and of the C1000 terminal...
Could not upgrade other controlers with EDT there is needed CAT ET which we don't have .....
Checked all steering and transmision sensors everythink works fine.....
On Trimble hardware changed all posible firmware....
Changed signal tipes from RangePoint RTX to RTK
See Video in atatchments....

Edited by vasile123 7/5/2018 06:05




Attachments
----------------
Attachments Challenger 865C.avi (3351KB - 38 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)