|
North Dakota | Numbers 1 and 2 I can't help you with. They are software issues and MAY be addressed in future software releases.
Number 3 is most likely corrupted data on the flash drive I personally believe it is related to As Applied version 31.6. Putting in 31.7 seems to have helped with the corrupted data. You can try to delete all the data from the usb drive or formatting it, is better. That fixes almost all the lockup issues.
Item 4: there are a dozen or so videos on youtube that show you haw to setup products in ISO task. Some are for CNH others for other brands of displays, while the way you enter the products are different for each brand the basic principles apply across all.
Any issues that you have with a 700 display and Aim Command Flex or rate control are a CNH problem. If you call Raven and say it is in a Patriot sprayer you will most likely be redirected back to CNH.
As far as putting in a Viper, the operation of the sprayer/rate control is exactly the same. It is in a VT and whether you have a Viper, Pro700, Ag Leader or JD 4630 the screen will look almost the same and will control the sprayer exactly the same. The only difference will be in the way you enter your information into the display.
As someone else mentioned you can add a operation and operation instance to a run screen. The only thing that is cleared out with the operation instance is the coverage, your lines and boundaries will remain.
The reason for most having the Pro700 is, if they have 5 other pieces of equipment it keeps the same basic monitor in all of them. Just makes it easier to move from tractor, to sprayer, to combine without having to relearn a different monitor each time.
Edited by raider2b 6/24/2018 12:24
| |
|
2018 Case Sprayer with Pro700 and Raven ISO
