|
NW IL, Mercer County | My sprayer tractor went down so I'm swapping my EZ 500, EZ steer, and EZ boom to a different tractor. After swapping, the flow meter shows 0 flow even with product going past it. Flow control valve works properly on manual. Boom 1 will open, but booms 2, 3, and 4 will not. I jumped the wires for each over to boom valve 1 and they will then open. I have 12V on boom valve 1 but 0 on the rest. I checked power again at the back of the tractor cab, where sprayer harness and raven harness hook together and still the same readings. I cant seem to get anything but some minor power registering at the raven harness plug-in at the EZ boom. Raven harness is for a 450. I'm not sure where to look next. Any help?
Edited by cbellfarms 6/7/2018 16:34
| |
|
EZ boom issue
