|
Westport, IN | I'm excited. I have a buddy who writes code for a living so I hope to lean on him a bunch. But I'm going to try myself first.
My plan for Hertz was to take one 1000 millisecond and divide by 2*Hertz. Then use that for delay. Any latent timing loss could subtracted from delay, but I'm not making Dynamite, or medical so close enough should work.
I am also using a ring buffer to average the analog input for three seconds (subject to change) and display the average number and a bar along the bottom of the LCD proportional to the weight. I'm also including a buzzer when zero weight is approached.
I have been contemplating a fuse/breaker when interfacing the outside world. Do you have any thoughts on that? It should all be high impedance but not sure.
| |
|
Using an Arduino and interfacing with AG leader
