western iowa | Fingers77 - 5/21/2018 17:02
There are two ways to do it, maybe.
You need to look in the setups for seed monitoring, the one for you is probably there. There should be a setting in there somewhere to add a percentage error plus or minus to the as read total.
There might also be an adjustment in the FIQ calibrations and you may be able to adjust it there, possibly not, since you are ground drive. I know that those of us that have FIQ run a drive, there is a way to calibrate seeds dropped there, from FIQ calibration.
If you can't find it, email me or reply back, I'll hunt on mine until I find it.
thanks Rob. I'll take a look tomorrow. Any idea why it's off that far to start with? I thought all monitors just counted pulses from the sensors? |