|
Echunga | Ive just purchased a versy 620 with 2900 hours.
Hydraulic pump will not activate unless steering wheel is turned slightly.
A bit of research there is a inlet line into pump which must activate the pump, this line has a i would suggest 2 needle valves, one i would suggest controls flow in pump which must make it acuate. This is the left vale.
We undid lock nut and screwed valve in about 1 full turn, pump works fine now.
Dealer went ballastic that we touched it and would stuff up pump by increasing pressure, we havent increased pressure of pump at all just pressure to activate pump.
Have we done the correct thing. | |
|