AgTalk Home
AgTalk Home
Search Forums | Classifieds (242) | Skins | Language
You are logged in as a guest. ( logon | register )

No voltage to section valves greenstar rate contriler
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 5/14/2018 09:54 (#6759762 - in reply to #6759415)
Subject: RE: No voltage to section valves greenstar rate contriler

Check and recheck that 2 pin molex connector with the red and black wires. Even if it looks "good" it may not be making a good connection. You can check to see if power is coming into connector first and if it is then plug in the other end and see if you still have power coming out the other end by probing the back side. Those come disconnected all the time and can be very hard to get a solid connection. Once you do get a solid connection put a zip tie in between the wires.
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)