Near Intersection of I-35 & I-90 Southern Mn. | It would be possible to have the switch on the Concord control the mapping on the 750. If you means have he 750 turn the Concord on/off with auto swath I don't think so.
To have the Concord control the mapping on the 750, it would be best to get a 12V automotive type relay. Wire the coil of the relay with one terminal going to a wire that goes ON/OFF with the Concord's switch and the other terminal to ground. That way whenever the Concord is ON, the relay becomes active and its output terminals are connected. Run a pair of wires from the output terminals from the relay to Pins 10 & 11 of the Port A Deutsch connector.
Go into the 750 menu system. Somewhere there are choices for when to map. One is to map while the 760 is steering, You want the one that says SWITCH. That way the coverage map is recording whenever the Concord is applying.
Edited by tedbear 5/9/2018 09:42
|