|
Thumb of Mi | I'm using Wm-drain on a Trimble Xcn2050 and Fm1000+ app with vm431 valve driver module. Controlling a gold digger stealth 3pt tile plow pulled by a 9380 quadtrac.
How can I level the plow manually when lowering into the start hole? I have been closing the field and going into settings/ wmdrain/ diagnostics to get manual control of pitch to level the plow.
Then I have to open the field and return to the design tab and continue. Install the tile run, then close the field again and go back to wmdrain diagnostics to pitch the plow up to get out of the ground.
The up/down buttons in wmdrain diagnostics are unable to be used while a field is open.
My dealer said this is the only way to manually level the plow and pitch back up at the end of the run when using a vm 431 valve driver.
Is he right?
Thanks | |
|