Posted 4/15/2018 09:28 (#6710425 - in reply to #6709640) Subject: RE: Clutch Module Configuration Failed
Cedar Bluff, AL
Thanks for that info on the ground wire. But Agleader sent a service bulletin with my Sure Stop Row Clutches P# 4001624. Ag Leader Technology TSB-003025. Basicly it says clutches shipped after March 1st 2011 include the elctrical change that requires a corrected power and ground connection. Clutches are identified by serial # after 110,000 and pin A is Red and pin B is Black. Both wire colors on old clutches were white. My clutches serial # 211095 wires are Red and Black. When I checked the voltage on my 8 Row Single row cable. The Red wire in each clutch cable connection had 12.33 volts to ground on it. So I don't know why It can't see any clutches. I'm going to place a jumper in all 8 rows and see what that tells me. And Thank you to everybody who has helped me try to figure this out. It is greatly appreciated.