|
| Were you converting to the new style wheel angle sensor like me or was this a new install for you?
Assuming you were doing what I was doing, field or factory means, "Was your tractor Accu-Guide ready from the factory?"
On our tractor if we had wanted Case auto steer all we would have needed is a NAV II, A receiver and a Pro 700 or Pro 600. The wiring and steering valve were pre-installed at the factory. So in that situation we select "factory". Ours calibrated fine this way.
If you are doing a new install though, what year is your Steiger? As I understand it 2015 and up (2015 may not be the correct year) would not supported by the Raven autotrac controller. | |
|