|
| Thanks a bunch Dennis. I moved mine out today. I can't hardly tell any difference in how sharp it turns but I'm also not in the field with it yet so maybe it will be a huge difference.
It was a real pain pulling the pin out on the left hand cylinder. Had to make a simple little puller. Figured I would only have to get it started so I didn't make it very fancy. Had to pull it all the way.
I don't know why it came so hard. The right-hand cylinder pin came out really easy. They have both been greased timely their entire lives. When I finally got the left one out it did not looked damaged and it was greasy. I greased it some before making the little puller. Took grease easily. Had to use a bottle jack to re-install it.
Here are pictures of the linear actuator installed after moving the cylinders out. It appears to fit great now:
(53C15EAF-3B44-4287-ADA8-913198C00050.jpeg)
(9777E0F4-2C7C-4383-B84B-875258AA9077.jpeg)
Attachments ---------------- 53C15EAF-3B44-4287-ADA8-913198C00050.jpeg (80KB - 83 downloads) 9777E0F4-2C7C-4383-B84B-875258AA9077.jpeg (101KB - 92 downloads)
| |
|