|
Hillsboro, AL | The receiver is almost a year old. 3.1 has been reloaded on the 252 and 4.2 has been reloaded on the Nav2. None of this has fixed the problem. I have spent over 6 hours now working on the system. It appears that the problem may be a hardware problem that happened to show up during the firmware update. The Nav2 and the 252 are not communicating correctly. Data is streaming into the Nav2, but the Lat and Long are 0. Either the 252 is not outputting correctly or the Nav2 is not receiving correctly. | |
|
Trimble Autopilot trouble
