|
East Central, Nebraska | you will appreciate the monitoring only, i have. my situation is different then yours because i did not go the iso route. i have never had an implement switch on my machine (all these years), i control everything with the master switch and the downforce situation is no different. looking at your cables, that looks like what i got though each cable seems to daisy chain to the next one so not sure on the lengths of yours, meaning i only needed each cable to reach the next row with the weigh pins and then at the end you put on the can terminator, a male on one end of the planter and a female on the other. on my 16 row i have 4 sensors all on channel 1.
to further complicate this i still have the agleader system on and i added an entire used precision planting active downforce/uplift system. this will allow me to have the monitor completely control my down and lift all while doing everything on the agleader monitor and not giving climate corp all my data.
i might also add everyone told me that after i monitored only for a year i would be controlling the next year. i can still honestly say in my situation i feel as if monitoring and adjusting springs would still be a great fit for me this year also but this system kind of fell in my lap and we are going to give it a try.
Edited by caseihfarmer 3/28/2018 20:43
| |
|
ISO Down Force Monitoring Only
