|
SE SD | New Holland 8870 Genesis leaking hydraulic remotes. I know it's been talked about a lot in this forum but I didn't find very specific recommendations. I have the service manual and printed out the parts list and I have a few questions.
1. Do you need to pull the mounting blocks off of tractor to change the o-rings?
2. Is the special tool #FNH00095 really required to pull the couplers out of the mounting blocks?
3. Is reinstalling the retaining spring difficult?
4. Before I tear it apart I want to pick up what I need at the dealer. It looks like each coupler needs 2 o-rings and a slipper seal. The pilot operated line check valve needs 2 o-rings. Will also need o-rings that go between the block and valve body if the block needs to be removed.
Any other tips?
(20180321_124829.jpg)
Attachments ---------------- 20180321_124829.jpg (54KB - 154 downloads)
| |
|