|
Manheim PA | This past summer I did some updates to our inverter. The hydraulic motor was connected using a steel coupler that had worn both the coupler and the drive roller shaft. I had the shaft machined down to use a love joy coupler. Also installed a bypass check valve to let it free wheel to a stop. When the valve is open it can only run one way. I can shut the valve to go off the other side but will not free wheel.
(IMG_20180216_171022998.jpg)
(IMG_20180216_171043957.jpg)
Attachments ---------------- IMG_20180216_171022998.jpg (102KB - 49 downloads) IMG_20180216_171043957.jpg (78KB - 56 downloads)
| |
|