Posted 10/1/2006 15:20 (#48068 - in reply to #48013) Subject: Re: Trimble 2400 Universal Receiver
It sounds like your keypad may be failing. If so, Ag Express Electronics in Des Moines can repair it; I don't know the cost, but I would guess a couple hundred dollars... Short-term, you can use AgRemote to connect to the receiver for configuration, bypassing the physical keypad.
I doubt that the keypad issue is related to your loss of differential correction. If the receiver is WAAS-enabled, you could switch to WAAS and see if you get a better signal. The only correction received by the Universal Receiver that requires a fee is the OmniSTAR VBS signal. I think it's $800/yr.
The Case IH AFS support guys may have some additional ideas.