|
| I had a customer that called and has come up with a solution that he says is working great to get the bolt holes to 11/16" on the hard to get at support plate holes on John Deere planters. He bought this package at Lowes which has one in it that goes to 3/4". He ground the 3/4" down to the 11/16" step and is using a 3/8" right angle drill like I posted above for those hard to reach holes. I had been looking for something like this but most skip the size needed. I thought his idea might help some of you out.
https://www.irwin.com/tools/drill-bits/unibit-step-drill-sets | |
|