|
Missouri | It would take more than just cabling. It would take programming. The plug at the front of the cab connects to the implement CANbus. The this bus is available at the corner post. The reason for separate cabling is Ag Leader uses a standard serial data bus, not CANbus, for GPS. For the GPS6500 to use that port it would have to output GPS to CANbus, and the Ag Leader display would have to be able to accept GPS in from CANbus, in addition to each of these devices to be connected at their respective locations. I have not seen any functional way to get an Ag Leader display to take GPS info in from CANbus, whether it was CAN A or CAN B.
Edited by KMech 2/10/2018 18:27
| |
|
Agleader 6500 to John Deere 7/8R Starfire harness
