|
Lakeville, MN | I cant give you pin outs but I did bench test this theory and it works. All you need to do is get the field IQ module on the CAN network and it will talk in series with the OEM module. Over one can connection at the planter. You need to find in the main planter harness a blank CAN connection and "T" in there. You may have to move the terminator to the end of the field IQ connection or add one but getting online is possible. We use accucontrol to run liquid fert at planting the system is ok after you get it set up and running however it can be a little awakard to set-up at times. We are using 20/20 for our planter control so I am only using the pro700 for steering and liquid control. But I did play with the OEM planter controls before I deleted them. This is a stack fold so I did not need the OEM for folding or bulk fan control. | |
|