AgTalk Home
AgTalk Home
Search Forums | Classifieds (167) | Skins | Language
You are logged in as a guest. ( logon | register )

Ag Leader SeedCommand on White 9000 Clutches
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
chaset
Posted 1/8/2018 14:40 (#6489309)
Subject: Ag Leader SeedCommand on White 9000 Clutches


SWMN
Hi all going to be looking at a White 9000 24Row30 Planter later this week. The plan is to have Ag Leader Control Everything, hydraulic drives, Seed monitoring and OEM clutches on their cable drives. I've done this on a 9000 24Row22 (same cable drive clutches) with everything Precision Planting/ RowFlow. The oem clutches lead to sections in the center of the planter and have six pin weather pack connectors. For the rowflow it was simple to plug these in the RFM base harness WP connectors and I was done. My thoughts for Ag Leader is two Clutch Control Modules for 24 Sections and use the Tru Count Harness with has the 6 pin WP connectors which would connect withe 6 pin WP coming from the row/sections.

My only concern is if there would be any polarity issues coming from the seedcommand side? Would the pins at the clutch have to been swapped around?

TIA
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)