AgTalk Home
AgTalk Home
Search Forums | Classifieds (39) | Skins | Language
You are logged in as a guest. ( logon | register )

How to know if a Magnum is auto steer ready
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Fingers77
Posted 12/7/2017 05:55 (#6411772 - in reply to #6411522)
Subject: RE: How to know if a Magnum is auto steer ready



Magnums were autoguide ready from the factory from 2010 on. Open the hood and confirm a gold colored valve between the firewall hand steering pump and the air filter housing.

A Trimble wiring kit for steering I think is only in the hundreds of dollars. You would need a NAV, and the power wiring for the 750 as well as an antenna cable.

If you bought a used NAV, I bet you could have it all done for less than 4K.

You don't even need a Trimble flashed NAV. one that ran with a pro 600 or 700 can be flashed with Trimble firmware for cheap.

I'm not a dealer so I don't know prices, but it's doable.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)