|
| I guess the “good” thing is the combine itself is working like it should. Even though there is no elevator speed for the AL, no buzzer is going off for any of the systems within the cab.
The first think I’ll plan to do is check the wiring to the battery for the moisture meter. Quick question, should that go right to the battery, or to the solenoid after that battery? I originally ran both that and the gps power to the battery and one of them ran my battery dead (never would shut off). I’ll check the wiring though.
For the elevator sensor, I’m a bit more confused. That would go through the speed module, correct? When I installed the system, although it was used, I did get a new shaft sensor cable that goes to the other side of the combine and plugs in. | |
|