Posted 9/27/2017 07:49 (#6273652 - in reply to #6272505) Subject: RE: Integra line nudge and shift?
Near Intersection of I-35 & I-90 Southern Mn.
gemarsh - 9/26/2017 17:49
seedcleaner - 9/26/2017 12:53
I'm afraid I know the answer but does the Integra have a way to move the guidance line to my current position like deere?
Thanks
Yes, with a straight ab line loaded, tap on the wrench and remark line to where you are. It will not save the line, once you reset the line. Yiu can save the line as a new name.
I use the method above quite often. With the correct machine configuration for the swath width, I pull in, stop and load the AB line. I then use the REMARK feature which will move the AB line to my current location. This can be seen on the screen as the guidance lines actually move on the screen when you do this. I can save this new AB line if I feel it will be useful in the future. I have not worked with a Deere system but this would seem to be the equivalent.
I have saved many of our property lines as AB lines which remain with the display. I then load an appropriate one and use the REMARK feature or SHIFT feature. With REMARK, the AB line is moved to where I am parked. With the SHIFT approach, I tell the system to move over half the width of the implement. The end result is very similar. In either approach I can save this new line.