|
| Keep in mind when running any ISO console with the DICKEY-john IntelliAg if you are using task controller functionalities such as prescription maps or section control, the lights on the CFM (Clutch Fold Module) will stay off until the planter is lowered, ground speed is sensed, and the control is active. Basically the task controller is assuming that since the planter is not "planting" the clutches do not need to be on. That is why the lights come back on when you turn off the task controller. This is normal operation. | |
|
AgLeader 1200 Isobus Question on Great Plains YP 4025 planter
