Posted 9/8/2017 19:36 (#6236797) Subject: Agleader strip till module for dry box
Bought a used dry box for strip till this year, currently setup ground drive thinking at some point like to go hydraulic with agleader. Tell me about the strip till module and what does it take to add hydraulic drive? https://support.agleader.com/kbp/index.php?View=entry&EntryID=744 Will i need everything they have connected or what? Does it require the fan input and bin sensor? Will a planter hydraulic drive like this one work to drive unit? https://talk.newagtalk.com/classifieds/Classified.aspx?id=86613 It's an older montag, SS box with the augers on bottom dumping into air stream. If setup hydraulic drive can i just T it in with the fan motor?
Currently has ground drive wheel with a hydraulic cylinder to shut off and on, pretty simple, maybe should just leave it alone but most everyone say hydraulic is way to go. Not really thinking of VRT right now today but in the future i could see banding different rates for different yield goals within a field and for sure field to field changes. It's single tank so one blend for sure and maybe for different crops could see wanting different blends.