|
| Since the 9670 is Greenstar Ready and has the mass flow/moisture sensors all you would have to purchase would be a receiver and monitor. Depending on what you're looking to get out of the system there are a few different routes you can take for receiver/monitor combinations. I would suggest an ITC receiver for mapping purposes but if you plan on using autotrac in the future go with the SF3000. As for monitor you can go with a good used 2600 that will do your documentation as well as run your autotrac. If you want a newer monitor, the 2630 is what I would recommend that will cover all your needs. You will still need a few brackets and a cornerpost harness but that should get you started.
Let me know if you have any questions, send me an email if needed
Edited by JTheede 8/14/2017 13:41
| |
|
What would I need for yield mapping on 9670 combine?
