AgTalk Home
AgTalk Home
Search Forums | Classifieds (44) | Skins | Language
You are logged in as a guest. ( logon | register )

Need Insight help please...again
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Allis4ever
Posted 8/9/2017 14:43 (#6176562 - in reply to #6174021)
Subject: RE: Need Insight help please...again


central iowa
tedbear - 8/8/2017 09:36

The Insight needs the GGA and VTG messages ON. This may be your problem. There is a screen where you can literally see the GPS messages coming in. There should be a PAUSE button that will allow you to freeze them so you can read them. Check to see that both the GGA and VTG messages are present. If not there should be a way to turn them ON.

The procedure for getting them ON will vary depending on the GPS that you are using. Sounds as if you are using a Trimble Smart Antenna where the GPS and antenna are all in one fixture on top of the cab. If so, you should be able to have the Insight set those output strings if they are incorrect.



Or if it is a trimble receiver, you should just be able to hit the tsip button and let it go get what it wants from the receiver. Only if it is a trimble receiver tho.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)