AgTalk Home
AgTalk Home
Search Forums | Classifieds (98) | Skins | Language
You are logged in as a guest. ( logon | register )

Need Insight help please...again
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 8/8/2017 09:27 (#6174004 - in reply to #6173927)
Subject: RE: Need Insight help please...again

East Central, Nebraska
I'm not going to be a lot of help here but I will tell you for sure that when the baud rate is set wrong and incorrect data strings are used when feeding gps from a trimble to an agleader display it will do a lot of crazy things just like you are seeing.

if its a square you are possibly using 372, 262, 252, who knows for sure. you should be able to configure the output of that gps to send the insight what it needs.

if this has worked successfully in the past and just started doing this and no settings have been changed then disregard what I said above. sometimes gps devices fail too.

has it been working well for sometime before this? is there steering involved? is the insight and the trimble the only devices in the cab or is the trimble sending gps to another display and then to your insight. this stuff may have no bearing on what is going on but a little more info would help. as I said, I personally have seen problems with incorrect baud rates doing what your seeing.
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)