Posted 8/7/2017 18:17 (#6172902 - in reply to #6170399) Subject: RE: Ag Leader 25 years event
This won't be for Integra will it? I could care less about calibration process but the trip bushel counters would be sweet.
When i find monitor off i find 95% of time a lower flow setting helps it. Just matter of how slow i can make myself drive. I've been know to run 1/4 mile pass at .7mph Yes .7 mph, and yes it takes 15-20 mins to get across the field. If i had autosteer i'd get out walk next to machine. 95% of the time it helps my calibration more and more the slower the cal. load i do. I have ran them found it to be 12% off on the low side.
We have 3 point scale on J&M cart, we load every semi leaves field with it and reset scale every load. I have paper logs in cart tractor everyone fills out and semi driver keeps master log at the dryer or bins. We run 1/2% low across the board. We filled a corn bin was off 11 bushel in 7k something bushels. Small bean bins have been within 2-3 bushel few times.