AgTalk Home
AgTalk Home
Search Forums | Classifieds (60) | Skins | Language
You are logged in as a guest. ( logon | register )

Valley Pivot guidance error
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
3 To Go
Posted 7/3/2017 18:36 (#6103785)
Subject: Valley Pivot guidance error


Central Illinois
We have an 8000 Valley with corner kit. It is guided by JD 3000 RTK, which has worked well. Had a safety fault and shutdown that can from operating out of bounds. What I found was the corner was steering inside of its normal path and exceeded the 2.0m allowable error. I then restarted and backed it up--which it corrected quickly and was back very close to its path. Upon switching to forward with water on it slowly moved back to the inside of its path and not in the exact same track as first error.

The guidance panel shows 19 sats and good RTK connection. No error codes show. If I run it dry and in engine start it will still safety out with a safety circuit not complete fault--but won't do that backing up.

This is a select 2 panel.

What am I missing?

TIA
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)