NW Minnesota | I know that most of these are probably in the scrap yard but we still have one. I just wanted to correct some information if anyone is looking to replace the Hypro pump and clutch. I went off an old post on here and the information was incorrect, and I ended up spending extra money and getting a different clutch from Agco...not cheap. Hopefully this will help the next guy and save him some money, coulda saved over $500 if I had known this last week.
You will also need a 1-1/2 close nipple in nylon to connect the "in" to the back of the pump, not just any close nipple will work, the fitting needs to thread almost tight to the pump housing since rear of the frame is tight to the pump.
Old post with some incorrect info. Do not order the Hypro #9263C-C the clutch will not work it interferes with the governor belt.
https://talk.newagtalk.com/forums/thread-view.asp?tid=563150&DisplayType=nested&setCookie=1
Here is the correct pump number, Hypro # 9203C. This was mentioned as the correct pump minus the clutch.
https://www.dultmeier.com/products/search/1175
Here is the correct heavy duty electric clutch. Flowserve # SIMCH2
https://www.dultmeier.com/products/search/1168# |