roaming | Amc4life - 6/26/2017 12:35
Yep, they call it a steer-ready kit. SmarTrax node and a cable, possibly an interface box. It all comes in the kit. You'll still need a receiver for that system too, since you're talking about using a Viper Pro. There are cables available to plug directly into the roof connector to go to either a Phoenix 200 or a 600S receiver, unless the original 262 or 372 are still on the roof. If so, they can be programmed to output what SmarTrax and the Viper Pro need.
Manual override sensor is different between the two (SmarTrax vs AccuGuide), isn't it? |