Winkler, Manitoba Canada | Adrian - 6/22/2017 19:02
When it's doing it, look at your pump PWM signal. (Wrench, Field IQ, Diagnostics, then the Sensor tab, from memory.) Mine will say the PWM signal is at 100%, but I doubt it, because I'll only have like 60 psi with a 90' boom and #4 tips. Then sidedressing with 2.5x larger tips it'll make 75 or more psi. I don't know what the deal is, but the FMX is lying or confused or something.
Adrian
In those two scenarios, are you running a similar speed? Are the bypass/agitation settings similar? |