Near Intersection of I-35 & I-90 Southern Mn. | KMech - 6/10/2017 19:55
If you're not steering or anything ISOBUS in the combine, an adapter cable should work for it. The only limitation of the adapter cable is that of the original display cable (older ones typically lack CAN B and Ethernet).
That's my thinking also since there is no steering or ISOBUS in the combine. I may try this as a test today, since the InCommand 1200 that I currently have uses the adapter with the Integra type display cable in the tractor. I would install the 1200 with adapter cable in the combine where an old style display cable is already mounted. This connects to a Raven Phoenix 200 on WAAS only. This has always worked fine.
If this works, it means I could get by the adapter cable rather than another new display cable for my proposed trade. The two $10,000 kits would include new display cables but they would be utilized in the old tractors where Steering is involved and would require the extra wires. This all comes about due to my goals of having the ability to move the InCommands among four locations. I desire to have as much remain in place as possible so I only need to move the displays.
Edited by tedbear 6/11/2017 06:54
|
Ag Leader Tradeup Programs for 2017
