Saddleworth & Kadina, South Australia | Hi All,
I'm searching for some information regarding running a FlexiCoil 60 Series Aircart on a MY17 9R tractor via the tractors ISO connector.
The aircart run an ISO ECU to operate and setup the aircart. What I want to do is run it directly through the ISO network on the tractor. The tractor is fitted with a SF6000 Receiver, GS3 2630 display on the A-Post pillar and a Gen4 4600 display on the armrest. The GS3 2630 is unlocked with AutoTrac and is setup for Documentation & GPS. The Gen4 4600 is only providing vehicle information.
I was was wondering:
- Can I unlock Section Control on the 2630 to operate the individual electric drive motors on the aircart but also view the section control coverage map on the same guidance map?
- Can I view the VT screen of the aircart on the 4600?
Your reply is much appreciated.
Chris |