Blvd d'Espair Bowhill, Sth Aust |
My 09 build 9330 has got to the point where I will need to deal with the worn splines. The rattle from the cooling fan is frightening, altho it hasn't thrown a fan speed code yet. Just over 3,000 hrs. There is nothing at all in my Operators Manual about lubrication, and I can't see any plugs on the sheave. I am aware that on more recent versions of Vari-Cool they thought to mention the requirement for lubrication, and have made some basic provision for that. I have watched several videos about it.
My question is...... do the required parts for 9330 now have provision for lube, or will they be identical to the original ? I recall seeing on here where someone had drilled and installed a grease zerk on the sheave to facilitate lube, and wondering if I could get that done before installing new parts that are otherwise the same as original, although I wondered about causing a balance issue.
I was hoping someone with specific experience could guide me.
Edited by Ham 5/24/2017 18:18
|