|
Illinois | I would strongly recommend against doing a "hard reset". Pulling the plug on the monitor while it's on should never be done unless the monitor has thrown an error and will not turn off with the key and the only way to shut it down is to pull the plug. Pulling plugs, doing TCM cals, putting in offsets will not fix a planter that is physically wide by 3.5". You need to address your row units but since we are in the middle of planting and if you don't have time to do that then don't fight what the planter is giving you. If from row 1 to row 8 is "x" distance then just put in that "x" + (30") as your implement and track spacing. We can all agree that the planter shouldn't be wide and it should be a perfect 20' but it sounds like it's not. | |
|
|
JD autosteer, still having issues with guess row spacing
