AgTalk Home
AgTalk Home
Search Forums | Classifieds (51) | Skins | Language
You are logged in as a guest. ( logon | register )

JD autosteer, still having issues with guess row spacing
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
mafrif
Posted 5/17/2017 11:36 (#6021409 - in reply to #6021139)
Subject: RE: JD autosteer, still having issues with guess row spacing



NC Iowa

cyclones30 - 5/17/2017 07:42

Drive your line going one way and mid-pass mark the edges of your tractor tires. Go a ways and turn around, come back on the same line and stop in the same spot. Do your flags (tracks) line up perfectly? This will tell you if your tractor offsets are good and steering system is good. If your tractor can do that w/ 0 lateral offset you know you've got a planter trailing (or alignment) issue. 


Exactly, start with the tractor.  x+y=z.  You are trying to find z with two variables.  Eliminate one.
Then, measure each individual row to row on the planter.  And then measure from drawbar or something centered on the tractor to each outside row, if they aren't equal everything will be messed up.
Have you done a hard reset like I recommended, I have had the exact same thing happen and both times a hard reset fixed it.

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)