AgTalk Home
AgTalk Home
Search Forums | Classifieds (49) | Skins | Language
You are logged in as a guest. ( logon | register )

Small timer combine
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
GM Guy
Posted 5/31/2017 22:14 (#6047902 - in reply to #6047597)
Subject: RE: Small timer combine


NW KS/ SC ID
nw_bearcat - 5/31/2017 19:15

Well...Bought the F3.

Before I kick off the road trip home, need a little help with one lever.

F3, diesel, hydro

Floor on the right side of the seat, there's a gear/range lever, needs to be in a special notch to start it. Just ahead of that is another lever...moves forward /back. Haven't determined what it does, or what spot it needs to be for operating


Congratulations!

I am not familiar with F3s, but I think they are like the M2 and L2 and M3 and L3.

If its a hydro its a 2 speed with start slot on one lever, and 2 speed range on second lever.

The shifter is 1st and 2nd in low range and 3rd and 4th on high range.

Find out your serial number and try to find an operators manual.

DO NOT buy this one till you make sure its right: http://www.ebay.com/itm/Allis-Chalmers-Operators-Manual-Combine-Gle...

Search "Gleaner F3 Manual" on ebay, and all sorts of operators manuals will pop up. click the pictures and read the descriptions, and find the one with the range that contains your serial number.

Good luck on your new purchase!

Start a new thread with some pics, I am sure many will be happy to see it!
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)