|
SW Ontario | T8 320 roll cal done with rtk. Tractor is right on. When I hook my planter up. Running newest software in the tractor as they just installed it. The planter and tractor trail properly when turning to the left. Turning to the right 5" to wide of guess row. This is the same at the drawbar. What could be causing this. I have no offsets in the planter settings. This didn't do this that I'm aware of before the software was installed. On diagnostic page it has "planter 1200 ver 30.3". If I unhook planter ISO plug it works fine. | |
|
Case 1250 planter and tractor roll cal issues
