AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Hagie Raven to Ag Leader
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 4/21/2017 12:02 (#5975293 - in reply to #5974993)
Subject: RE: Hagie Raven to Ag Leader


Southern Minnesota Between Freeborn & Wells
Pin 4 goes to E2. Connect this to the terminal on the dimmer switch that is always connected to one of the other terminals. It will be connected to one and then when you step in the switch it goes to the other. That goes to pin 4. The other two go to pin 1 and pin3. This means that E2 will be connected to pin 1 to be On but pin 3 when it is off. That way the system will know that there is a switch for E2 and use it if the configuration says to use it for the Master. Use the brown connector in your picture.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)