|
Central Kansas | Monitor is a seed flow 2 for a 8 row Cyclo planter. Hooked it up to the harness and it consistently stays in the test mode. Scans 16 Rose as failed, as if I never hooked up to the harness. Sprayed contact Cleaner on both the male and female pin areas. I find no evidence of broken wires.
Anyway to test for what might be wrong? Anyway to "shock " the monitor out of the test mode?
Planting without a monitor is the pits! After yesterday, don't ask me how I know. That is a whole Nother story and not good!
, | |
|
Monitor problems
