Near Intersection of I-35 & I-90 Southern Mn. | I just came in from my rig. I needed to connect it to the planter so my test configuration would be able to get to the actual run stage. I put in a meter cal of 100 and some other reasonable information. When I chose the configuration I was asked for the controlling product in exactly the same way as if I was going to try to control it with a Liquid Module. I chose NH3 as the product and "N" as the controlling product and the system responded with a box showing 0 lbs/acre.
This leads me to be quite certain that you should use the Raven liquid number for the cal divided by 10 just like I do with a control situation. Since your flow meter cal on the Raven flow meter is likely 740 or so divide that by 10 and use 74.0 |