|
NW MN | Can an Integra that has an Intellislope unlock be used to help manually keep a scraper or rotary ditcher on grade? I would not have a water management module but have RTK. My idea would be to mount the antenna on the machine and pretend it was a tile plow. Do my survey along ditch bottoms, make a tile design, then follow through with the ditching machine with the screen in the mode as if I was laying tile. From reading the manual it looks like the upper right corner shows your elevation relative to the intended grade. Will it display that data as I drive without the water management module attached so I can manually run the hydraulics to stay close to grade?
To sum it up I'd like to make a ditch profile using the elevation survey and then use the screen as a elevation lightbar to "steer" my ditching machine up and down manually to stay on grade. | |
|
Intellislope unlock be used with scraper or ditcher?
