|
North Central Iowa | We had the same problem with our MT a few years back and they suggested we put a simple $2.00 electrical switch and made sure the MT was off when we started the combine up. We did run across the problem after we installed the switch. After a quick call to MT, they sent us a leveling module that compensated for the combine going up or down a hill. We also noticed are radar that we were using for speed was really bouncing around mph...we would vary +- .7 mph and never felt the difference. MT suggested we used the wheel magnets instead of the radar and after that...the darn thing worked great...until we upgraded to an Insight last year :)
Hope this helps | |
|
Micro trak grain track yeild monitor
