|
| I don't think the fact that it was left plugged in has anything to do with it.
2 possibilities that I can think of:
1. Faceplate has failed. Send to AgExpress for repair.
2. Somehow the contrast and/or backlight has been adjusted such that the display cannot be seen. Power off the receiver, then press and hold the 2 and 4 buttons (up and right arrows) as the receiver powers on. Count to 10 after the receiver is powered on, then press the Enter button. This should restore the receiver defaults, and the display should be readable if this was the problem. | |
|
CIH/Trimble 132
