|
| I have the same baler with the same problem. I have had 2 dealers look at. No solution The bale command checked out and so did the sensors.. The junction box, the one you hook up the baler to the tractor, has 2 relays in it. They form a ground for each other. If you pull the top off you will see a coil that picks up a spring with a contact point on it. See if it is burnt, and if when points are not touching it is making good contact with the bottom. I changed the relays and finished the last 2 A. without a problem. Before I could make 100+ bales some days, other days maybe 5. I should know if this is at last a fix in a couple of days. | |
|
NH 650 Round Baler
